DDR and ITG

So my son bought an L-Tek pad but no handlebar, so I did some research and borrowed from another design and created the platform and handlebar for the L-Tek. I know many people are buying L-Tek pads so I want to share my design. I borrowed a lot of design ideas from dave eddy.. Thanks Dave https://www.daveeddy.com/2018/03/27/diy-pump-it-up-arcade-pad-platform-with-bars/ Here is  pic of the finish product minus paint. Here are the design elements. Frame Made of 2x4's 1 x 2 strips to hold l-tek in place 1 x 12 x 35.5 x 1/2 (cut from 4x8 plywood) 1 1/2 inch screws to hold it together Elmers glue to bind each board together I bought the pipe from Lowes.  I bought one long 10' piece and had them cut it into 3 pieces with threads to create the handlebar, which saved me some money. Directions Assemble the handlebar. Make sure to tighten everything as tight as you can and make sure to be careful with the threads. They ...